Product Description
FEATURES:
1. Output power:0.5
2. Frequency range:According to the civil frequency of each country and regio
3.Channel:Related to various civil frequencies
4. CTCSS:38(1-38)CDCSS:60(39-99)
5. Screen backlight:Easy to operate at night or in the dark.
6.Low power warning and power indicator
7.Call end Beep
8.Keyboard Locks
9.VOX
10.Flashlight
Technical specification
1. Frequency range UHF: 462-467MHz (FRS or PMR446)
2. Frequency tolerance: ±500HZ
3. Maximum frequency deviation: 2.0KHZ±0.1KHZ
4. Modulation sensitivity: 6 mV
5. RF output power: ≥0.4W
6. Emission current: ≤0.5A
7. Antenna current: ≤0.5A
8. Modulation distortion: ≤ 5%
9.CTCSS/DCS frequency offset: 0.35KHZ±0.05KHZ
10. Receive sensitivity: ≥15 dB(-121 dBm1.5KHZ)
11. Squelch sensitivity: ≤-122dBm
12. Waiting current: ≤15mA
13. Audio power output: ≥1.6V
14. Audio distortion: ≤ 5%
FAQ
Q: Why sometimes your partner's voice is intermittent?
A: Please note that you are within normal communication range, If you want use radio in distance range, please change other antenna with a bigger output power.If still same problem, please send the radio back to your authorized dealer repair.
Q: Can't turn on talky and even it is switch on, it often shuts
off automatically?
A: Please check the battery contacts on the walkie talkie. If it is
broken or twisted, please return the radio to your authorized dealer for maintenance during warranty.
Q: Can't transmit or receiver signal with other members?
A: First, please verify that the channel frequency and the CTCSS
you are used the same as those of your group members. Please make sure that you and your partners are all within the radio coverage, If the channel frequency and the CTCSS are the same.
Q: Why sometimes received voice from other groups?
A: Two way solutions.You can change another channel or change another channel frequency by PC software.
Q: Which is better -VHF or UHF?
A: epends on the terrain. The UHF signal is attenuated or
absorbed by foliage, rough terrain and trees, VHF does better outdoors. The VHF has difficulties penetrating steel and
concrete, UHF does better in and around buildings. If you use the radios in both environments, we prefer using UHF band.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}